, , , ,

LED Tri-proof Light 50w , ECO batten led warehouse lighting

IMPRESS LED tri-proof light 50w purification lamp has two rows of internal light bars, the use of high light-transmitting outer cover, making the light body luminous surface more extensive, beautiful atmosphere. Aluminum base adopts aviation casting process, hard and resistant to oxidation.


  • Beautiful and sturdy
  • Extra bright
  • Excellent heat dissipation
  • Complete set Easy to use
  • Simple atmosphere of a hundred different installation
Asking for This Light

 

Impress LED Tri-proof Light 50w Advantage


  • Energy-saving and environmental protection, convenient and durable eco batten LED purification bracket light is designed with high brightness and double rows of led chips, energy-saving and power-saving, uniform light, and easy installation.
  • High CRI, restore the original color of the object, high color rendering finger chip, color reproduction true, and high saturation.
  • No video flash, reduce the burden on the eyes, and the phone camera to the light source screen at the end of the strobe ripple, better protection of vision.
  • 3cm thin led integrated tube light body, thin and beautiful appearance, and strong heat dissipation.
  • Suitable for a variety of application scenarios – the color temperature of the led tri proof light has more options, such as parking lots, production plants, supermarkets, offices, and other places.

 

LED Tri-proof Light 50w Specification


ModelIPS-CSW50
LED chipSMD 2835
LED luminaire efficacy110lm/w
Power50w
Input voltageAC 120~265V
Input frequency50/60Hz
DriverFixed output
DimmableNo
Lumens5500lm
Beam angle180°
CRI>80
Color temperature6500k/5000k/3000k
Rated life40000hrs
Warranty2 years
Housing MaterialAluminum + PC Cover
DimensionL: 1200mm*W: 75mm*H: 30mm

 

LED Tube Light Supplier Impress Lighting FAQ


Q1. How to test the led tube light?

A: To test the photoelectric parameters of the LED tube light, with a photoelectric test system, integrating sphere, power tester, etc., the general CRI is between 70-80, and the power factor is preferably better than 0.95. If the tube is not bright, this is quite untestable. Because the LED tube internal is a power supply, generally need for professionals (like IMPRESS – LED tube light supplier) can test!

Q2. How to make a led tube light circuit?

A: There are 2 kinds of existing circuit boards used for LED tube lights: aluminum PCB and glass fiberboard.

  • Aluminum PCB: Most of the tubes on the market are made of aluminum PCB. Aluminum substrate structures from top to bottom are circuit board layer, thermal insulation layer, and aluminum base layer.
    1. Circuit board layer: mainly with a strong current-carrying capacity of copper foil for the circuit, the price of copper is relatively high, so the thickness of copper foil directly affects the price of aluminum substrate. Some of the markets to do aluminum PCB copper foil to do a little thinner, the price is cheaper, but the product’s current-carrying capacity will be reduced.
    2. Thermal insulation layer: the best thermal insulation effect is a special ceramic polymer, but the price is very high, the price of an aluminum plate made out of this material is more than 150USD/m², Difficult to accept such prices. The market to reduce costs and improve competitiveness will be replaced by other materials, such as epoxy resin, glass fabric, etc.
    3. Aluminum base layer: generally aluminum plate is used as a metal support component, but also useful copper plate, thermal conductivity is better, but the price is very high. The basic requirement of the aluminum base layer is good thermal conductivity and not easy to bend.
  • Fiberglass board: In pursuit of price advantages, some manufacturers use fiberglass board to make PCB circuits. Glass fiberboard also has several types, the price is also different, divided into the following categories: glass fiberboard, single-sided copper foil glass fiberboard, double-sided copper foil stripped fiberboard, perforated glass copper foil glass fiberboard.

Glass fiberboard: this PCB board is directly on the board cloth circuit, with no other processing, the price of such a board is the cheapest, but almost nothing heat dissipation capacity.

Impress LED lighting company’s full series of fixtures with high-quality multi-layer structure aluminum PCB, heat dissipation is more advantageous, and the quality is naturally more secure!

 

Get More Special LED Light Pricing