28 watt LED Tube Light Advantage
- Universal installation: Use this LED tube light 4 ft in any type of setup. Whether you use an existing ballast or direct wire, this plug-and-play light works easily. Each LED t8 tube light can be single- or double-ended and can support 85v-265V installations.
- Bright: Each LED tube light 4 ft provides 3900 lumens of clear, quality light for your 4-foot fixture, illuminating your space more effectively than a standard 48-inch fluorescent tube light. Use in stores, garages, workshops, offices, basements, indoors, outdoors, or anywhere you need a tubular tube.
- Save energy: Reduce energy usage costs by 59% when you use this 28 watt LED tube light 4-foot (1200 mm), the perfect alternative to 60-watt fluorescent tubes. Save you time and money by switching to brighter, longer-lasting energy-efficient lighting.
- Continuous lighting: Up to 40,000 hours of use, which means no replacement for the next 45 years. Each t8 natural white led tube light lasts 3.8 times longer than a traditional tube light at a fraction of the cost of a 4-foot tube.
- Reliable Lighting: 48-inch T8 LED tubes to provide flicker-free light, zero latency, and zero worries, providing high-quality indoor and outdoor lighting. Each tube bulb is easy to install, wet location rated, rigorously lab tested for your safety, suitable for magnetic and electronic ballasts, direct line ballast bypass mounting, G13 2-pin base, and 3-year warranty.
Impress 28 watt LED Tube Light Specification
|LED chip||SMD 2835|
|LED luminaire efficacy||140lm/w|
|LED Tube power||28w|
|Input voltage||AC 85~265V|
|Housing Material||Aluminum + PC Cover|
Natural White LED Tube Light FAQs
Q1. What is the brightest led tube light?
A: Transparent cover LED tube lights will definitely be the brightest, but the full transparent harsh eyes.
LED tube lights are available in semi-plastic and semi-aluminum, full plastic tube (wrapped with aluminum), glass tube, full PC tube, etc.
Full plastic tube, glass tube, full PC tube can reach more than 90% or even 95% light transmission rate. And the luminous surface is relatively large for half plastic and half aluminum.
Recommended by the front to back, full plastic tube (aluminum cladding) > glass tube > full PC tube > half plastic and half aluminum. Glass tube note fragile, there are restrictions on the use of occasions!
Q2. Can i use led tube lights in a fluorescent fixture?
A: Ordinary fluorescent light fixture depends on what specifications, generally the LED tube lights have corresponding specifications to match; some LED tubes are not compatible with the rectifier and glow starter, so you need to take the glow starter off, the bracket to access the 220V zero-fire wire can be.
How to install depends on what LED tube to buy, on the surface as long as the direct installation can be, in reality, may have to do some wiring changes, or even to add an external power supply, it all depends on the electrical specifications of the LED tube to buy. Our Impress T8 LED TUBE LIGHT 4 ft can be installed directly on the fluorescent frame, as long as it is the same size.
Q3. How long do led tube lights last?
A: LED energy-saving tubes save electricity up to 80% or more, the life span of ordinary lamps more than 10 times, almost maintenance-free, no need to often replace the lamp, ballast, glow starter problems, about half a year down the savings can be replaced by the cost. IMPRESS green environmentally friendly semiconductor electric light source, soft light, pure spectrum, conducive to workers’ vision protection and health, 6500K Cool light source gives people a visually cool feeling, which helps to concentrate and improve efficiency. Check our 4 ft led tube light price, you can contact us through the form below, or email us directly for a quote.
Get More Special LED Light Pricing